Éditeur(s) : HAL CCSD
Résumé : Correspondance : Dupraz@supagro.inra.fr
En conduite agroforestière, durant leurs premières années de croissance les arbres sont protégés par des abris individuels plastiques ventilés (disponibilité du C02, limitation de l'augmentation de temperature). Les arbres conduits en abri ont une croissance en biomasse totale comparable à celle des arbres sans abris (Dupraz, 1997b), mais présentent une croissance en hauteur plus importante,une croissance en diamètre inferieure (Bergez and Dupraz, 2000) et une biomasse racinaire plus faible de 17% (Dupraz, 1997a). Des études (Bergez and Dupraz, 2000 ; Dupraz and Bergez, 1999) ont conduit à éliminer la responsabilité des facteurs microclimatiques pour expliquer ces diffférences. Il restait un facteur explicatif : I'absence de sollicitation mécanique des arbres dans les abris. En effet, les sollicitations mécaniques telles que le vent induisent des mouvements des axes de plantes. Il a été démontré que les plantes ne perçoivent pas les forces auxquelles elles sont soumises mais leur état de déformation (Coutand and Moulia, 2000). Celle mécano-perception engendre des modifications de la croissance en dimension (Larson, 1954; Coutand et al., 2000) et de l'allocation de la biomasse des vegetaux (Niklas, 1998). Cette expérimentation avait donc pour but de voir si des arbres en abri soumis à des sollicitations mécaniques artificielles retrouvaient une croissance en dimensions et une répartition de la biomasse semblables à celle des arbres de plein vent. L'expérimentation a été conduite sur des merisiers d'un an et comportait 4 traitements : Abri, Abri+flexion artificielles, Sans Abri+vent, Sans abri+tuteurage. Les résultats ne montrent aucune différence de biomasse totale produite entre les 4 traitements. Par contre, les sollicitations mécaniques (naturelles ou artificielles) réduisent la croissance en hauteur (d'environ 60%), stimulent la croissance radiale d'environ 30% et induisent une allocation de la biomasse en faveur des racines. L'absence de sollicitations mécaniques est donc le facteur responsable des différences entre arbres en abri et arbres au vent.Quantitativement, les flexions artificielles n'étaient pas équivalentes à celles induites par le vent et n'ont pas mimé complètement les effets du vent. Reproduire les effets mécaniques du vent dans l'abri nécessite de parvenir à quantifier les variations d'état mécanique induites par le vent sur les axes des arbres. Ceci suppose donc d'abord de comprendre le couplage fluide-structure. Ce type de travail a été initié sur un couvet de luzerne, il explique les couplages vent-mouvements des tiges à la surface du couvert (Py, 2005). Ce type de travail pourrait servir de base à la prolongation de ce travail.
L'arbre isolé
Montpellier, France

hal-01032058
https://hal.archives-ouvertes.fr/hal-01032058

Éditeur(s) : HAL CCSD
Résumé : Communication orale + résumé
absent
Plant Biomechanics International Conference
Clermont-Fd, France

hal-01190786
https://hal.archives-ouvertes.fr/hal-01190786
PRODINRA : 215235

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : Publication Inra prise en compte dans l'analyse bibliométrique des publications scientifiques mondiales sur les Fruits, les Légumes et la Pomme de terre. Période 2000-2012. http://prodinra.inra.fr/record/256699
Background and Aims Plastic tree-shelters are increasingly used to protect tree seedlings against browsing animals and herbicide drifts. The biomass allocation in young seedlings of deciduous trees is highly disturbed by common plastic tree-shelters, resulting in poor root systems and reduced diameter growth of the trunk. The shelters have been improved by creating chimney-effect ventilation with holes drilled at the bottom, resulting in stimulated trunk diameter growth, but the root deficit has remained unchanged. An experiment was set up to elucidate the mechanisms behind the poor root growth of sheltered Prunus avium trees. Methods Tree seedlings were grown either in natural windy conditions or in tree-shelters. Mechanical wind stimuli were suppressed in ten unsheltered trees by staking. Mechanical stimuli (bending) of the stem were applied in ten sheltered trees using an original mechanical device. Key Results Sheltered trees suffered from poor root growth, but sheltered bent trees largely recovered, showing that mechano-sensing is an important mechanism governing C allocation and the shoot-root balance. The use of a few artificial mechanical stimuli increased the biomass allocation towards the roots, as did natural wind sway. It was demonstrated that there was an acclimation of plants to the imposed strain. Conclusions This study suggests that if mechanical stimuli are used to control plant growth, they should be applied at low frequency in order to be most effective. The impact on the functional equilibrium hypothesis that is used in many tree growth models is discussed. The consequence of the lack of mechanical stimuli should be incorporated in tree growth models when applied to environments protected from the wind (e.g. greenhouses, dense forests).
ISSN: 0305-7364

hal-01032056
https://hal.archives-ouvertes.fr/hal-01032056
DOI : 10.1093/aob/mcn054

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Background and Aims: In rain forests, sapling survival is highly dependent on the regulation of trunk slenderness (height/diameter ratio): shade-intolerant species have to grow in height as fast as possible to reach the canopy but also have to withstand mechanical loadings (wind and their own weight) to avoid buckling. Recent studies suggest that mechanosensing is essential to control tree dimensions and stability-related morphogenesis. Differences in species slenderness have been observed among rainforest trees; the present study thus investigates whether species with different slenderness and growth habits exhibit differences in mechanosensitivity. Methods: Recent studies have led to a model of mechanosensing (sum-of-strains model) that predicts a quantitative relationship between the applied sum of longitudinal strains and the plant's responses in the case of a single bending. Saplings of five different neotropical species (Eperua falcata, E. grandiflora, Tachigali melinonii, Symphonia globulifera and Bauhinia guianensis) were subjected to a regimen of controlled mechanical loading phases (bending) alternating with still phases over a period of 2 months. Mechanical loading was controlled in terms of strains and the five species were subjected to the same range of sum of strains. The application of the sum-of-strain model led to a dose-response curve for each species. Dose-response curves were then compared between tested species. Key Results: The model of mechanosensing (sum-of-strain model) applied in the case of multiple bending as long as the bending frequency was low. A comparison of dose-response curves for each species demonstrated differences in the stimulus threshold, suggesting two groups of responses among the species. Interestingly, the liana species B. guianensis exhibited a higher threshold than other Leguminosae species tested. Conclusions: This study provides a conceptual framework to study variability in plant mechanosensing and demonstrated interspecific variability in mechanosensing.
ISSN: 0305-7364

halsde-00454145
https://hal.archives-ouvertes.fr/halsde-00454145
DOI : 10.1093/aob/mcp286

Éditeur(s) : HAL CCSD
Résumé :   Diplôme : DEA
il s'agit d'un type de produit dont les métadonnées ne correspondent pas aux métadonnées attendues dans les autres types de produit : DISSERTATION
La lumière est le principal facteur limitant de la croissance en forêt tropicale humide. Malgré 1% du rayonnement incendie disponible en sous-bois, les jeunes arbres doivent rejoindre la canopée pour assurer la régénération du couvert. La compétition pour l'accès à la lumière est forte, et leur stabilité mécanique est souvent perturbée. La gravité étant un facteur omniprésent , tout déséquilibre entraîne des flexions de l'arbre et peut-être dramatique. Les arbres peuvent cependant palier ces déséquilibres en réorientant leurs axes par gravitropisme. Les "moteurs" des réorientations dans les axes lignifiés, sont la croissance radiale, la différentiation de bois de réaction et souvent, une croissance radiale excentrée.La capacité au redressement dépend aussi des dimensions des axes. Ces différents paramètres modulent donc la réponse gravitropique. Les réorientations dépendent de la croissance et donc également des ressources en lumière. Ce travail avait pour buts de quantifier l'impact de la croissance radiale sur le redressement d'une espèce tropicale et de mettre en évidence d'éventuelles différences d'efficience, de réorientation des arbres en fonction de la disponibilité en lumière. La réponse gravitropique de jeunes Symphonia globulifera artificiellement inclinés a été étudiée sous deux niveaux de lumière (1% et 25%°). L'importance de la croissance radiale dans la réaction gravitropique a été quantifiée par une analyse cinématique du redressement et l'utilisation d'un modèle biomécanique simple. Ce travail montre que même à 1% de lumière, les arbres ont une réponse gravitropique. L'efficience de réaction est d'ailleurs plus forte qu'à 25% de lumière. Cette réaction semble donc être une fonction prédominante pour les plantes en sous-bois. Nous avons également montré que le redressement est fortement corrélé à la vitesse de croissance radiale. Les données obtenues complètent celles déjà acquises sur des espèces tempérées. Elles permettront des comparaisons interspécifiques du processus gravitropique et serviront à valider des modèles biomécaniques plus complexes que celui utilisé dans cette étude.
https://hal.archives-ouvertes.fr/hal-01189227

hal-01189227
https://hal.archives-ouvertes.fr/hal-01189227
PRODINRA : 16967

Éditeur(s) : HAL CCSD CRC Press
Résumé : Among the ecosystem services provided by forests, wood provisioning takes a central position. Wood and derived products have played a critical role in the evolution of human kind and demand for raw material is increasing in a foreseeable future. Wood is used for energy production, construction and a wide variety of products for which different properties are required. Anatomical, chemical and physical properties of wood are determined through a complex process called xylogenesis controlled by internal and external signals and occurring during the life of the tree. In this chapter we describe i/how wood is formed and ii/the different factors controlling this developmental process with emphasis on the molecular machinery involved, iii/the functions of wood and iv/the biotechnology approaches developed to improve wood biomass production and properties genetically.
Tree Biotechnology

ISBN : 978-1466597143
hal-01032436
https://hal.archives-ouvertes.fr/hal-01032436

Éditeur(s) : HAL CCSD Botanical Society of America
Résumé :  
Tree buckling risk (actual height/critical buckling height) is an important biomechanical trait of plant growth strategies, and one that contributes to species coexistence. To estimate the diversity of this trait among wide samples, a method that minimizes damage to the plants is necessary. On the basis of the rarely used, complete version of Greenhill's model (1881, Proceedings of the Cambridge Philosophical Society 4(2): 65-73), we precisely measured all the necessary parameters on a sample of 236 saplings of 16 species. Then, using sensitivity (variance) analysis, regressions between successive models for risk factors and species ranks and the use of these models on samples of self- and nonself-supporting saplings, we tested different degrees of simplification up to the most simple and widely used formula that assumes that the tree is a cylindrical homogeneous pole. The size factor had the greatest effect on buckling risk, followed by the form factor and the modulus of elasticity of the wood. Therefore, estimates of buckling risk must consider not only the wood properties but especially the form factor. Finally, we proposed a simple but accurate method of assessing tree buckling risk that is applicable to a wide range of samples and that requires mostly nondestructive measurements.
ISSN: 0002-9122

hal-01032059
https://hal.archives-ouvertes.fr/hal-01032059

Éditeur(s) : HAL CCSD
Résumé : For their survival, plants need to grow in height to access light resource while ensuring their mechanical stability. Growth in height amplifies the mechanical constraints due to wind and gravity. Nevertheless these constraints represent morphogenetic signals that plants respond to by modifying their growth. There are two regulatory processes of growth by mechanical signals: thigmomorphogenesis and gravitropism. Thigmomorphogenesis expresses by a reduction of growth in height and an increase of growth in girth under the effect of mechanical signals. This is a way for plants to grow with controlling slenderness of their axes to avoid buckling (beating down). In some cases (storm, sudden exposure to a new mechanical environment) this process is not sufficient to prevent buckling, gravitropism then acts to restore axes orientation in case of no lethal buckling. With measuring several traits, we have demonstrated that these processes have a fundamental ecological role in the control of tree habit and the vertical structuration of ecosystems. As studies of climate changes seem to predict a higher frequency of storms it is important to study the diversity of their efficiency.
Colloque Adaptation au Changement Climatique de l'Agriculture et des Ecosystèmes

hal-00797377
https://hal.archives-ouvertes.fr/hal-00797377

Éditeur(s) : HAL CCSD
Résumé : Gravitropism is a major process in vertical growth as it allows the positioning of plant in the gravity field and thus, for trees, it takes part in the light foraging strategies. Without any gravitropism, trees would adopt a weeping habit or fall on the ground due to the increasing with growth supported weight, especially at the advance regeneration stage (sapling stage) in the understorey, where tree are very slender and poorly stiff. Most of the gravitropic studies are made by physiologists in order to understand the process and thus are associated to complex laboratory methods (genetic engineering, anatomical studies, accurate 2D ou 3D measurements of form changes with time). In order to study the ecological relevance and the specific diversity of gravitropic performances in natural forests, we developed a framework that uses different kinds of datas. Synchronical analysis has been done i) at the population level in large sample of trees and ii) at the tree level from destructive measurement of the dissymmetry maturation strains known to be the main motor of the posture control reaction of trees. In both cases, biomechanical models allows to estimate some aspects of the dynamic gravitropic process. Diachronical analysis has been done in natural conditions on permanent plots, or in a more traditional way, by observing in greenhouse experiments the righting movements of plants artificially tilted. In the first case, the problem is the high variability of natural disturbances and the slowness of growth and movements in the dark understorey. The second choice allows a measurement of a capacity (i.e. the ability of the species to react in quite extreme conditions of verticality disturbance but good for growth light and nutrient conditions) that is more easy to analyse, but is maybe not so relevant for estimating the ecological strategy (some species could have developed a high efficience of gravitropic reaction in natural conditions by avoiding the mechanical disturbance or adapting the reaction to slow growth and changing environments in natural conditions). All approaches use the same basic biomechanical modelling, i) to analyse simultaneously the reaction and the disturbance (due to the weight increase) during growth, or ii) to combine different parameters (geometry, growth, weight, maturation strains) involved in shape changes and posture control. They give a classification of the species according to their gravitropic performances. Results on 15 species are discussed, with relation to shade-tolerance or avoidance.
6th Plant Biomechanics Conference
Cayenne, France

hal-00565956
https://hal.archives-ouvertes.fr/hal-00565956

Éditeur(s) : HAL CCSD CRC Press
Résumé : Among the ecosystem services provided by forests, wood provisioning takes a central position. Wood and derived products have played a critical role in the evolution of human kind and demand for raw material is increasing in a foreseeable future. Wood is used for energy production, construction and a wide variety of products for which different properties are required. Anatomical, chemical and physical properties of wood are determined through a complex process called xylogenesis controlled by internal and external signals and occurring during the life of the tree. In this chapter we describe i/how wood is formed and ii/the different factors controlling this developmental process with emphasis on the molecular machinery involved, iii/the functions of wood and iv/the biotechnology approaches developed to improve wood biomass production and properties genetically.
Tree Biotechnology

ISBN : 9781466597143
hal-01204210
https://hal.archives-ouvertes.fr/hal-01204210
PRODINRA : 257126